Two 75KW Mining Traction Motors Shipped for Underground Traction Equipment

2026-09-10

HNYT packed and shipped the first batch of two 75KW mining traction motors to a customer's company on September 10, 2026. The customer is developing underground traction equipment and approached HNYT for motor selection based on the equipment's intended use and preliminary design parameters. HNYT recommended the YVF75Q AC traction motor, originally used in 20 ton trolley mining locomotives, for this application.

Equipment and Configuration

The supplied motors are the YVF75Q AC traction motor model. The shipment specifications are listed below.

Item	Shipment specification
Model	YVF75Q
Motor type	AC traction motor
Shipment quantity	2 units
Rated power	75 kW
Rated voltage	380/220 V
Rated current	132.2 A
Rated speed	1001 r/min
Rated frequency	51 Hz
Frequency adjustment range	5–102 Hz
Rated torque	716 N·m
Motor weight	590 kg

Motor Selection for the Customer’s Equipment

The customer's requirement began with an equipment design and the need to select a motor for it. HNYT used the intended underground traction application and the customer's preliminary parameter requirements as the basis for recommending the 75 kW model.

This project applies an AC traction motor for locomotive use to the customer's own underground traction equipment design. The first two motors have now been dispatched to the customer's company, completing the initial shipment following the selection work.

Packing and Dispatch

Before packing, the two motors were photographed on the workshop floor. Their output shafts were wrapped for protection. During packing, a motor was covered with plastic inside a wooden case, with timber bracing positioned across the top.

The packing photographs show both an open case and a closed case in the workshop. The shipment was then loaded onto a truck for dispatch to the customer's company. These photographs document the preparation and loading of the first batch.

For a 75KW mining traction motor enquiry, view the YVF75Q AC traction motor product page and send HNYT your equipment application, preliminary design parameters, operating conditions and required quantity. This information provides the starting point for discussing motor selection and a quotation.